Blue OEM Coolant Concentrate is a GENUINE GLYSANTIN® G30® Original Equipment Manufacturer (OEM), fully licensed and warranty approved, Type A ethylene glycol anti-freeze/anti-boil coolant as used in initial manufacturer factory fills. It uses a technically advanced OAT (Organic Acid Technology) inhibitor system that is silicate, phosphate, amine, borate and nitrite free. The extended long-life inhibitor formulation prevents rust, corrosion, cavitation and cooling system degradation for up to 12 years or 800,000 km.

PLEASE NOTE: Blue OEM Coolant Concentrate replaces 7 Year 450,000 KM Blue Coolant Concentrate.

Application

Blue OEM Coolant Concentrate is suitable for the cooling systems of petrol, LPG, light and heavy-duty diesel, and industrial engines where an OAT-type anti-freeze, anti-boil and anti-corrosion coolant is required.

Blue OEM Coolant Concentrate is suitable for:

• Passenger cars
• 4WDs
• Motorcycles
• Light and heavy-duty commercial vehicles
• Construction equipment
• Agricultural equipment

It is suitable for Australian, European, Asian and US vehicles. Being silicate, borate and phosphate free, it is particularly suitable for European and Japanese vehicles that use blue coolant, including Nissan, Subaru and Suzuki.

Blue OEM Coolant Concentrate provides long-term protection against rust and corrosion for all materials used in the engine and cooling system. It protects cast iron, aluminium, copper and solder alloys, as well as hoses, seals and plastics. It is particularly effective in cast aluminium engines operating under load or in extreme hot and cold climates.

It may be used in all vehicles that require a blue factory-fill coolant and is suitable for out-of-warranty servicing while maintaining OEM performance. It is also ideal for motorcycles.

Mixing Instructions

Blue OEM Coolant Concentrate should be mixed at a concentration of 50% coolant and 50% water for maximum inhibitor life and optimum anti-freeze and anti-boil protection.

Penrite recommends using De-Mineralised Water when mixing, although the phosphate-free formulation allows mixing with normal tap water if necessary.

Blue OEM Coolant is also available as a 50% premixed formulation, ready to use without dilution.

Cooling System Flushing

Penrite recommends flushing the cooling system before a complete service refill. Penrite Radiator Flush effectively cleans the system in approximately 7 minutes and prepares the cooling system for new coolant.

Dose Rate, Freezing Point & Boiling Point

Penrite recommends mixing at the vehicle manufacturer’s recommended concentration levels.

De-Mineralised Water

When mixing coolants, Penrite recommends using de-mineralised water at the manufacturer’s recommended concentration levels for best performance and protection.